3 versions: 60 cm x 10 m, 60 cm x 25 m, 100 x 25 m.
Stick & Go® quick and efficient protection of surfaces like stainless steel table tops
Easy to apply with no heat required, provides good bonding to both smooth and rougher surfaces whilst being easy to remove after use. It can be directly used from the roll however for additional ease of application use; dispense using a Colad Foil Dispenser.
Benefits of Stick & Go®
- A self-adhesive strong and durable white film. Makes cleaning very easy
- White satin finish for optimum reflection
- Strong and durable (100 micron)
- Treated with paint adhesion
- Easy to apply and cut
- Solvent resistant
- Anti-slip surface
- Easy to remove, does not leave adhesive residue
- Can be used in combination with Dust Control to eliminate dust
- Not anti-static
Technical features of Stick & Go®
- Material: Polypropylene (PP) (Antistatic)
- Melting temperature: 120°C
- Color: White
- Film width: 60 or 100 cm
- Roll length: 10 or 25 m
- Thickness: 220 micron
- Ribbed surface: Anti slip properties for safe working
- Application temperature: Between 15 and 40°C
- Packing: Per roll in a box
Colad Stick & Go® is not conductive. To identify if Stick & Go® is suitable to apply in your ATEX working area, the user has the responsibility to identify and asses the risks involved applying the product in his process, following the ATEX user directive 99/92/EG.
Following the requirements in the norm EN 60079-32-1, the user could identify that for gas group IIA & IIB Stick & Go® could be suitable to apply on electrically guiding surfaces as for example stainless steel mixing tables in zone 2, as the product is not thicker than 2 mm. The risks and compliance has to be always assessed by the user, and is by the ATEX user directive 99/92/EG always the responsibility of the user.
# Where Stick & Go® is not conductive, it is not suitable to be applied on the floor of a ATEX zoned area (zone 0-1-2 / 20-21-22).
## The user should always identify and asses if the product Stick & Go® is creating risks in his process, it’s the users responsibility to meet the requirements set in the ATEX user directive 99/92/EG and identify if Stick & Go® can safely be used in his process.
### Only people with sufficient knowledge of the ATEX user directive 99/92/EG are allowed to assess the risk in a ATEX zoned area.
IN CASE OF DOUBT, DO NOT USE THE PRODUCT AND CONSULT AN ATEX EXPERT!
|676010|| 60 cm x 10 m |
|676025|| 60 cm x 25 m |
|6710025|| 100 cm x 25 m |