Mixing Room

Our mixing room equipment and extraction systems offer the complete professional mixing room solution. All equipment is manufactured in polished stainless steel to avoid paint contamination, prevent rust and allow easy cleaning. The complete solution includes tables, washing machines, can containers, all the extraction tubes and fans to renew the air in the mixing room. Consult with our experts to get a quote for your new clean and efficient mixing room. High quality and compliance with all environmental regulations are guaranteed. All mixing room equipment complies with ATEX 137, CE, EXCatIII2GcIIBT4, EG machine directives 2006/42/EG and 94/9/CE group II. EMM stainless steel mixing room equipment is the best solution for a safe and clean mixing area that conforms to current regulations.

Work Station
Stainless steel working tables and spray boards
View category

Stainless Steel Table 180cm without doors

Without doors in two different sizes. Height adjustable. Polished flat work surface. Spilled fluid stays on worktop. Vapour extraction over the complete working surface at a height of ± 20 cm. Tables can be covered with the Colad Stick & Go for fast cleaning. Extraction point: Ø 180 mm
Go to product

Stainless Steel Table 180cm with doors

With doors. Height adjustable. Polished flat work surface. Spilled fluid stays on worktop. Vapour extraction over the complete working surface at a height of ± 20 cm. Tables can be covered with the Colad Stick & Go for fast cleaning. Extraction point: Ø 180 mm
Go to product

Stainless Steel Table 120cm without doors

Without doors in two different sizes. Height adjustable. Polished flat work surface. Spilled fluid stays on worktop. Vapour extraction over the complete working surface at a height of ± 20 cm. Tables can be covered with the Colad Stick & Go for fast cleaning. Extraction point: Ø 180 mm
Go to product

Stainless Steel Table 120cm with doors

With doors. Height adjustable. Polished flat work surface. Spilled fluid stays on worktop. Vapour extraction over the complete working surface at a height of ± 20 cm. Tables can be covered with the Colad Stick & Go for fast cleaning. Extraction point: Ø 180 mm
Go to product

HS spray Board 120cm

This full stainless steel spray board is suitable for spraying small parts, such as spray samples. The Spray board is fitted with an extraction point to be connected to an extraction system and is equipped with a pneumatic spray gun connection, a pressure regulator and a manometer.
Go to product

HS Spray Board 180cm

This full stainless steel spray board is suitable for spraying small parts, such as spray samples. The Spray board is fitted with an extraction point to be connected to an extraction system and is equipped with a pneumatic spray gun connection, a pressure regulator and a manometer.
Go to product

Ventilators
To make sure that all harmful / dangerous gasses are eliminated, a well equipped mixing room needs a good ventilation system. Our ventilator units create a healthy environment for your staff, eliminating health and safety risks.
View category

Ventilator Unit 380V

To make sure that all harmful / dangerous gasses are eliminated, a well equipped mixing room needs a good ventilation system. The Hamach ventilator units create a healthy environment for your staff, eliminating health and safety risks.
Go to product

Ventilator Unit 230V

To make sure that all harmful / dangerous gasses are eliminated, a well equipped mixing room needs a good ventilation system. The Hamach ventilator units create a healthy environment for your staff, eliminating health and safety risks.
Go to product

Cleaners
A range of cleaners for easy and thorough cleaning of spray guns and other items.
View category

HR 1400 Spray Gun Cleaner

Cleaning your spray gun in between jobs is a time consuming task. The quick and compact Hamach Spray Gun Cleaner increases your productivity by enabling you to clean your spray gun from leftover water based paint in a matter of seconds!

This compact cleaning device is easy to operate in three simple steps: Jet, Flush and Dry.

It limits your time loss and gets the highest efficiency out of your disposable cup system. It contributes to a clean and safe working environment due to its
integrated and sustainable cans and is durable and easy to clean thanks to its stainless steel body.

Can be placed in ATEX zone 2.

Go to product

HR 3000 Automatic Spray Gun Washer

One compact station for cleaning your spray guns. Possibility to connect to the Hamach ventilation system. Automatic spray gun washer with capacity for two spray guns. Equipped with fluid pumps, cleaning brushes and cleaning nozzle for final rinsing of spray gun with clean fluid. During the automatic cleaning process you can clean a spray gun manual on the working platform. The cleaning process stops automatically when you open the lid. Only driven by max. 4 bar compressed air.

  • Dimensions: 158 x 84 x 60 cm (H x W x D)
  • Working height: 105 cm
  • Weight: 70 kg
  • Extraction point: Ø 180 mm
  • Extraction volume: 400 m³/h
  • Collecting tank: 2 x 25 L
Go to product

Micro Cleaner HR 1000

A wall mounted manual stainless steel washing tank, ideal for the manual cleaning of putty spreaders and small pieces. Equipped with a cleaning brush and automatic circulation of fluid. Suitable to be used with the special Hamach cleaning fluid (009819). All you need is a connection to a compressed air line and fill the special cleaning fluid in the tank of the HR 1000. Ready to use by opening the front flap. The front flap is also the cleaning table and when you close the flap the rest of the cleaning fluid flows back into the tank. The Micro 1000 can be connected to a steam extraction line. The Micro 1000 is developed for wall mounting and has a drain cock to drain the dirty cleaning fluid. Dimensions: 46 x 19 x 53 cm (H x W x D). mTank content: 7 l. Extraction point: Ø 80 mm.
Go to product

HR 2600 Spray Gun Washer Water Based

Pneumatic manual spray gun washing machine suitable for use with cleaning fluids as well as with water. Fitted with a membrane pump, only a direct connection to water and with space to carry out the coagulation process and a pneumatic system to accelerate this process. A large tank with a filter system and 4 large wheels to collect al waste. Is easily moved. A security valve limits the water excess. Dimensions: 158 x 84 x 60 (H x W x D). Working height: 105 cm. Weight: 70 kg. Extraction point: Ø 180 mm. Extraction volume: 100 m³/h. Collecting tank: 60 liters.

Go to product

HR 2000 Spray Gun Washer Solvent

 One compact station for cleaning your spray guns  Possibility to connect to the Hamach ventilation system. A manual spray gun washer for solvent paint. With vapour extraction connection. All you need is a 5 bar air pressure connection. Simple and intuitive to use. Dimensions: 158 x 84 x 60 (H x W x D) Working height: 105 cm Weight: 65 kg Extraction point: Ø 180 mm Extraction volume: 400 m³/h Collecting tank: 60 liters
Go to product

HR 2400 Spray Gun Washer Water Based

Pneumatic manual spray gun washing machine suitable for use with cleaning fluids as well as with water. Fitted without a membrane pump and with space to carry out the coagulation process and a pneumatic system to accelerate this process. A large tank with a filter system and 4 large wheels to collect al waste. Is easily moved. A security valve limits the water excess. Dimensions: 158 x 84 x 60 (H x W x D). Working height: 105 cm. Weight: 70 kg. Extraction point: Ø 180 mm. Extraction volume: 100 m³/h. Collecting tank: 60 liters.

Go to product

Cleaning Fluid HR 1000

This cleaning product is developed for safe, fast and environmental friendly removal of polyester mastic, two-component polyurethanes, water-based and solvent-based paints, clear coatings and all kinds of glue from putty spreaders, rules and small components. It is the replacement for chemical cleaning and solvent based products that are harmful for environment and health. The HR 1000 Cleaning Fluid is fast working product made of biodegradable ingredients. It fits perfectly in a sustainable workshop.

Go to product

Filter Bag for Spray Gun Washer Water Based (coarse)

Filter Bag for Spray Gun Washer Water Based (coarse)

Go to product

Filter Bag for Spray Gun Washer Water Based (thin)

Filter Bag for Spray Gun Washer Water Based (thin)
Go to product

Waste Disposal

View category

Manual Paint Waste Container

Special waterproof waste containers for paint waste and solvent products. You can place leftover paint and solvents upside down inside this container and close it. Liquids will leak into two different cans underneath. Any hazardous vapours will be extracted from the container through an exhaust duct. It is the perfect solution for paint waste from tins, cups, etc. Complies with environmental standards and regulations. Dimensions: 122 x 100 x 60 (H x W x D) Extraction volume: 100 m³/min Weight: 71.5 kg Extraction point: Ø 80 mm
Go to product

Pneumatic Paint Waste Container

Special waterproof waste containers for paint waste and solvent products. You can place leftover paint and solvents upside down inside this container and close it. Liquids will leak into two different cans underneath. Any hazardous vapours will be extracted from the container through an exhaust duct. It is the perfect solution for paint waste from tins, cups, etc. Complies with environmental standards and regulations. Dimension: 122 x 100 x 60 (H x W x D) Extraction volume: 100 m³/h Weight: 50 kg Extraction point: Ø 80 mm.
Go to product

HIGH Model Paint Waste Container

Special waterproof waste containers for paint waste and solvent products. You can place leftover paint and solvents upside down inside this container and close it. Liquids will leak into two different cans underneath. Any hazardous vapours will be extracted from the container through an exhaust duct. It is the perfect solution for paint waste from tins, cups, etc. Complies with environmental standards and regulations. Dimensions: 124 x 90 x 60 (H x W x D) Extraction volume: 100 m³/h Weight: 50 kg Extraction point: Ø 80 mm
Go to product

Miscellaneous
Miscellaneous high quality products for a professional workspot
View category

Computer Scale Table

Computer scale table with vapour extraction. Adjustable height to keep your computer scale stable. Dimensions: 60 x 45 x 125 cm (H x W x D) Extraction point: Ø 80 mm Extraction volume: 30 m³/h Weight:18 kg
Go to product

Waste Bin 250L

This is a waste bin specially designed to go with all RVS furniture. The front opening extends the table size. Use it with normal 250 liters plastic bags. Waste box volume: 250 liters.
Go to product

Contact form

Hamach